620020
Trans Sprocket Locking Tool 80-07 Big Twins with Belt Drive
Designed to lock the trans sprocket for removal of sprocket nut
IN STOCK
$70.95
620140
Trans Cover Bearing Remover & Installer 1999-2006 TC88, 5 & 6 Speed Trans, Except 06 Dyna
Used to remove & install trap door bearings and pull trap door leaving shafts in place
IN STOCK
$110.95
Primary Drive Locking Bar
4 SP Big Twins & 5 SP FXST
Use to lock the primary chain for removal/installation of the sprocket & clutch nuts
IN STOCK
$27.00
580050
Primary Drive Locking Bar
5 Speed FXR & FLT Big Twins
Use to lock the primary chain for removal/installation of the sprocket & clutch nuts
620070
580030
Primary Drive Locking Bar 06-08 Dyna Models, 07-08 Softails
Use to lock the primary chain for removal/installation of the sprocket & clutch nuts
IN STOCK
$27.00
580040
IN STOCK
$27.00
Main Drive Gear & Bearing Kit 5 & 6 Speed Trans 86-2006 Big Twin Models, Except 06 Dyna (HD-35316B)
Remove & Install Main Drive Gear & Main Case Bearing
IN STOCK
$116.95
620040
Mainshaft Sprocket Wrench 2006 Dyna, 07-08 Twin Cam Models
Designed to remove & install the 2 1/4" nut locking the trans pulley in position
IN STOCK
$91.50
620210
Trap Door Puller 06-Pres Dyna, 07-Pres Twin Cam Models
Designed to remove the trap door and gear set from the transmission case with ease.
IN STOCK
$84.25
580060
PICTURE
COMING
SOON
Trans Cover Bearing Remover & Installer 06-Pres Dyna, 07-Pres Twin Cam Models
Designed to remove & install trap door bearings
IN STOCK
$110.95
Primary Drive Locking Bar
07-08 FLHR,FLHT, FLHX, FLTR
Use to lock the primary chain for removal/installation of the sprocket & clutch nuts
IN STOCK
$27.00
Trans Cover Bearing Remover & Installer 1980-1998 Big Twins, 5 & 6 Speed Trans
Used to remove & install trap door bearings and pull trap door leaving shafts in place
IN STOCK
$88.00
620130
IN STOCK
$36.95
Trans Shaft Installer 5 & 6 Speed 80-Present
Designed to install the Mainshaft and countershafts on all 5 & 6 Speed Transmissions
620010
620030
IN STOCK
$47.50
Trap Door Puller
5 & 6 Speed Trans 80-Present
Designed to remove the trap door and gear set from the transmission case
Mainshaft Sprocket Wrench 36-Present, TC88 A & B Except 06 Dyna (HD-94660-37B)
Designed to remove & install the 1-7/8" nut locking the trans pulley in position
IN STOCK
$79.00
620060
580010
Mainshaft Bearing Race Tool
5 & 6 Sp Trans 84-2008 Big Twin Models (HD-34902B)
Designed to remove & install the mainshaft bearing race
IN STOCK
$109.50
620120
Clutch Spring Compressor Tool 90-97BT
Designed to release the pressure plate for removal and installation of retainer ring for clutch replacement
IN STOCK
$53.00
580020
Primary Drive Locking Tool (HD-41214)
Designed to lock the primary chain for removal & installation of the engine sprocket nut
IN STOCK
$24.00
620080
Main Drive Gear Seal Installer 80-06 Big Twins, Except 06 Dyna 5 & 6 Speed Trans
Designed to install the main drive gear seal to the proper depth in perfect alignment
OUT OF STOCK
$45.00
620090
Drive Gear Bearing & Seal Installer 80-90 5 Speed
Designed to install drive gear bearings to the proper depth & seal with gear out of transmission
IN STOCK
$31.00
620100
Drive Gear Bearing & Seal Installer 91-06 5 Speed
Designed to install drive gear bearings to the proper depth & seal with gear out of transmission
IN STOCK
$31.00
620210
